Product Description
The Wall Mount is ideal for obtaining side-to side rotation and upward/downward tilt. It supports LCD screens up to 44 lbs. Compatible with screens that have VESA 50mm/75mm/100mm mounting hole patterns. Arm extends from wall up to 17.7" or folds flat to save space. The two arm assembly allows the full articulation of the monitor/keyboard, folds up to 3" from the wall and extends 17.7" to the center mounting of the monitor. This mount has two articulating joints which together provide 180 degrees of movement. Cosmetic cover provides cable management. How to check whether this mount fits your LCD? First the weight of your LCD must be less than 44 lb. If your LCD Monitor or TV has 4 holes on the back of the screen that are either50mm, 75mm or 100mm apart from each other vertically and horizontally, then this bracket will fit. If you currently have a stand attached to your LCD TV this is usually removed prior to fitting the wall mount and 4 holes should be revealed.
Rate Points :3.0
Binding :Misc.
Brand :VideoSecu
Label :VideoSecu
Manufacturer :VideoSecu
Model :B08
MPN :ML413B
ProductGroup :Home Improvement
Studio :VideoSecu
Publisher :VideoSecu
Color :black
Price :$150.00USD
Lowest Price :$29.99USD
Features
Rating Point :2 Helpful Point :0
The Wall Mount itself is not as strong as I had hoped and it started to fall out of the wall when I attached the TV. Even when using the anchors it was not very sturdy.
unusable
Rating Point :1 Helpful Point :1
These were a great price..I should have known. I bought 2. The fit was so bad they were unusable...the monitor would not stay and tilted sideways. Maybe I can use them to hold a cookbook.
Pretty Nice
Rating Point :4 Helpful Point :0
I had no trouble "squeezing" in the electrical cord and cable in the "flimsy" plastic casing, but the plastic wouldnt stay shut until I super glued it together.
Wrong Item Pictured
Rating Point :3 Helpful Point :0
the item i received was not what was pictured, the mount i got was silver and did not have a wall bracket cover as shown on the picture
also it did not fit my 26" LCD TV, which i fixed by having my friend make me a new faceplate at work
the product i got worked good after modification but the hardware had to be replaced because the screws were so short
i contacted the store after i received the product and they offered me a refund but i would have to pay to ship it back which was 2/3s of the price of the mount which is why i just modified it
Youll probably need to buy hardware to mount this.
Rating Point :3 Helpful Point :1
The description isnt really clear about this mount, neither are the instructions. It is a pretty sturdy bracket that has plastic pieces to cover the workings, but they dont stay on too well. Black electrical tape remedies this problem.
The hardware to mount this to the wall only works if you attach to a wall stud or into concrete. If you hang it on drywall or plaster only youll be heading to the hardware store to get some mollys or other type of fasteners (only use this method if your TV is small and light). The screws included to mount the TV to the bracket were too short for my application, and may be for yours also. I could only get a thread or two into the TV, and thats not enough. So youll need a bit longer screws.
The thumbscrew that sets tension for tilt (up and down) is hard to tighten due to location and the slot is a little too wide, so the TV slants a little to the left or right. Once the screw is tightened to prevent this, the TV wont tilt.
Other than that, it works fine.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น